Відео

What about how the rotation axes were determined... How did the "Zero" of the A axis and C axis get established? It's clearly not the Grid origin.

Bro, can u show pls how to make a drive surface for difficult 5x model? 🙏

Hello does this run with mach3 ?

Is there someone I can talk to, that will help me with this? I'm trying to do a 4-axis simultaneous job for a model with some undercuts in it. I can't seem to get a good result, and I don't understand why

Hummmmmmmm, it seems to me this vid is a bit problematic: it does not start proprely. I have been waiting for about 10 minutes. Maybe something is worn out or lost.

Mybe it would be very helpfull if you also can explain the offset. As you can see very cleary in this video the offset of the trunnion is not correcty set; the ring still rotates around x-axis.

I am trying the trial version.. Why does 5axis planar finishing using drive surface 'line' option sometime cause extra rapid lines? Is there a way to control rapid lines in a toolpath, perhaps turn all rapid lines off while in a cut? I want the toolbit to enter, cut and exit at the end. Instead, it enters, cuts, jumps away from surface few time at certain points, continues cutting and then exits at the end. I'm using 'line' option and not circular or conventional setting.

How does he process the drivesurface from a+ to a- without turning into a 0?(coup in a0)

Unfortunately these video tutorials have very low quality, is not possible to read important info (e.g. layers names), and is uncomfortable for the eye to watch, in general!

i follow step by step - after I select the cutter 'Corner end - roughing) click enter The MC_Command Cutter_Corner_End_D12_R_1 never display above the Command ( So i never be able to continue) Why I did not see it (I can not copy the line to paste it on a notepad) --- What did i do wrong???

this is awesome but it is useless for student at beginner level like me - we need this model so we can learn and practice step by step --- this is suck ---- How can i learn and gain skills --- please give us the model in this tutorials so we can learn - I regret to purchased MADCAM 7 and do not have any help to learn

pls help me - i am new and in need of help - is there anyway I can download the model in this tutorial so i can learn step by step while following the video please help me

pls help me - I just got the MadCam 7 as a plugin for Rhino7 and I am struggling to learn - all i want to do is to load my STL file 'model' create tool-paths and save the gcode to run on Mach3 - is there anyway I can have the file for this lesson so I can follow the video and learn (I have Rhino7 & MadCAm 7 as student license). I has a 5 axis Trunion. Pls help me

Gtreat video.. i have some issue any help please? i use rhinoceros 5/CAM and want to cut on surface not smooth just a little with angle like sphere but not fully ...how to say i dont know:-) example as (soap to wash hand) or like umbrella they have same shape like sphere surface as you know surface is not smooth a little bending...i dont know which axis in mach3 trajectory or name of axis is that in 2 1/2 axis or in 3 axis i tried some of them but nu luck:-) am as beginner if you know can you explain me step be step your help will greatly appreciate it...

The stock would have fallen off the machine after the first external profile cut :/

Snyggt

Any chance to see MadCAM for RhinoMAC?

nice video

less programming , manually and more auto, machining . please, thx

i wish no driving surfaces and model stock auto by madcam, no by user and simulation with stock , without toolpaths on it , thanks !

i wish eliminate drive surfaces and just go over model surface like another cam programs

its not trunnion, missing half of A axis !

i have to turn off volume !

need to create 2 lines?

Madcam simulate collisions between the piece and machine?

i have 5 axis cnc machine plz help me to fix my axis settings. manigee65@gmail.com

i am trying alot alot to get my settings but no success. plz need help

Will the 4 Axis abilities allow me to create complex geometries? In example, can I cut on the 4th Axis, a 3-D viking longboat made of wood, or a carving of a 3D human? Front, back, and both sides of each of these projects?

Will the 4 Axis abilities allow me to create complex geometries? In example, can I cut on the 4th Axis, a 3-D viking longboat made of wood, or a carving of a 3D human? Front, back, and both sides of each of these projects? Or would the 5 Axis be the only one I could use with this software?

woww

Is it possible to drill hole not perpendicular to cplane but in an angle?

Well Done Sir

This has a lot of potential. It should be easy to create a toolbar with the most common operations performed with one mouse click. Every part we produce is different than the last, but there are similarities. By dividing the types of parts into "families", a script can then be produced for each of these "families" so that there is a one-button solution for everything. It doesn't get much easier than that!

from gabriel ballester perdonen no se que haser yo tengo el madcam 4.3 y lo instale en rhinoceros5 no tengo el rhinoceros 4.en este moento me seria muy dificil pagar por un upgrade de madcam5no se que puedo haser.estube tratando de instalar el madcam5 y no se porque google no me lo deja bajar hoy voy a tratar de nuevo asi ustedes me pueden mandar la licencia .gracias gabriel ballester

thanks for the great tutorial

The madCAM command parameters are not appearing on the command line in my latest version of madCAM and Rhino5. I've been able to figure out how to script parameters for some of the commands but so far -MC_Box and -MC_Profiling are not scripting. Any comment Joakim? This is a very exciting and powerful feature and just the toolpath commands I've been able to script so far are saving me loads of time in my workflow! I hope scripting will continue to be supported for all madCAM commands :) Leo

cool :)

Guaoo, is amazing, thanks

Thank you Joakim for this Video. At 8min the simulator shows the entire block and then the material removal with the tool. My simulator does not the same thing, is there some settings for that, or is it the next release?

Thanks for this video Joakim. The drive surface functionality is very powerful.

Thanks for this video Joakim. I didn't realize how versatile the recalculate command is. We will use what you have demonstrated here.

That is correct, the cutter tool is kept perpendicular to the drive surface. It is possible to use all of the standard 3D functions like roughing, planar finishing, z-level finishing and pencil tracing from a 3D drive surface in madCAM. The drive surface can either be a surface that is part of the model, or like in this example, a separate surface that is not part of the model.

How does this differ from milling by curve boundaries? Does drive surface always keep the cutter at a perpendicular angle to the surface?

It doesn't get much easier than that for simultaneous 5-axis programming!

TI had hoped this would be true simultaneous with Y+A moves for accessing undercut areas and flat wall sections with the side of a tapered cutter without having to write loads of extra indexed XYZ paths after a seperate A movement.. .. do you intend to even make such an option available? I think it would be handy for those of use who are not ready to maker the jump to 5 axis. I use RhinoCam and it does not have this functionality either, which is why I am looking at your software..

I want to thank you for this software. I have been looking for 2 years for a reasonably priced 5 axis software. Having seen your software in action I have now decided that I am going to purchase your software.